Chinese| WeChat| Our products:vertical turbine pump, vertical wet pit pump, vertical oil sump pump, vertical condensation pump, right Angle gearbox.
20 years of vertical turbine pump Provide vertical turbine pumps and gearboxes
Hotline:008618507312158008613974960765
Current Location: HOME /Product /power plants pumps

Contact Uscontact us

Hunan Perfect Industry Co., ltd
Address:Xiangyin Industrial Park, Jinlong Town, Xiangyin County, Hunan Province, China
Contact: Manager Hu, Manager Yi
TEL:008618507312158
Cell Phone:008613974960765

power plants pumps

vertical multistage condensate extraction Canned Turbine pump

vertical multistage can condensate extraction pump

Online ConsultationService Hotline
008618507312158
Product Description

Fit-for-purpose condensate extraction pump

LTDN vertical can condensate extraction pumps, are specified wherever limited NPSH is available, either due to system constraints or liquids operating near to their vapor pressure, typically for condensate extraction and heater drain pump applications. NPSH requirements of the pump are met by simply adjusting the length of the pump and can, with the advantage of minimized floor space usage.


Main benefits
  • Carbon graphite product lubricated bearing in bowls and columns for long maintenance-free periods

  • Removable seal housing allows servicing of the throttle bushing without removing the head

  • Separate fabricated driver stand allows the use of one suction and discharge head per pump size

  • Spacer coupling allows servicing of the mechanical seal and thrust bearing as required

  • Lateral and anti-rotational ribs provide uniform inlet velocity along the can length

Main applications

The LTDN pumps are vertically suspended, double-casing, bowl diffuser pumps specially designed for condensate extraction and heater drain pump in:

  • Thermal power plants

  • Gas-fired combined-cycle power plants

  • Nuclear power plants

  • Industrial power plants

  • Concentrated Solar Power (CSP) plants


vertical multistage condensate extraction Canned Turbine pump


1. Single suction high Nss (suction specific speed) or double suction low Nss first stage

Reduced net positive suction head required (NPSHR)

2. Replaceable wear ring surface for impellers and bowls

Allows conservation of the running clearances

3. Carbon graphite product lubricated bearing in bowls and columns

Long maintenance-free periods

4. Shaft sealing by single or double mechanical seal with removable seal housing

 Allows servicing throttle bushing without removing the head

 
5. Axial thrust bearing in pump or in motor 

Adaptable to IEC or NEMA motors

6. Cast or fabricated suction and discharge head with separate fabricated driver stand

Allows using one suction and discharge head per pump size

7. Space coupling

Allows servicing the mechanical seal and thrust bearings as needed

8. Provided with lateral and anti-rotational ribs

Uniform inlet velocity along the can length



Online Service
Contact information

Hotline

008618507312158

Working hours

Monday to Friday

Mobile phone

008613974960765

QR code
online service